BRUSH ON ~ NO-SKID
ANTI- SKID COATING
BRUSH ON ~ NO-SKID is a single component skid proof coating and resurfacing compound. It is a safety coating designed to accident proof areas where operational conditions such as oil, grease, water, ice and chemicals spills reduce the normal traction needed for safety. The unique resin properties of a thin coat have the power of forming a long lasting anti -skid coating on all traffic areas. It can be used on all surfaces such as concrete, wood, metal, tile and blacktop.
BRUSH ON ~ NO-SKID is OSHA compliant. Use BRUSH ON ~ NO-SKID directly from the can with a brush, roller or squeegee and in 15 minutes you have a surface with the texture of 60 grit sandpaper. Coverage is approximately 200 square feet per gallon. BRUSH ON ~ NO-SKID is available in the following colors; clear, white, battleship gray, OSHA yellow, red and black.
AREAS OF USE:
Steps, ramps, exits, walks, fire stairs, equipment, entrance ways, loading docks, ladders, marine docks and flat beds.
Wash surface with heavy duty de greaser to remove dirt, fat, grease, wax, salt and other soil. Rinse and dry area thoroughly.
GENERAL DESCRIPTION Epoxy Anti-Skid Coating
Corrosion Factor Non-CorrOSive Vapor Pressure (mmHg) N/A Vapor Density (Air = 1) N/ A Solubility in Water Not soluble Specific Gravity (H20 = 1) .: N/ A % Vollttlle by Volume , 0% pH N/A Free Acid None Wt per gallon N/ A
Label use directions should be followed carefully.
Keep away from children Do not take Internally.
Avoid excessive contact with skin .