MK-350 AEROSOL
ELIMINATES RUST-STOPS CORROSION-PAINTABLE
RUST CONVERTER
Changes rust into an inert, protective coating.


Description:
This aerosol surface conditioner and primer changes existing rust into a dark, inert protective polymeric coating that seals out moisture and prevents future rust and corrosion. It also provides an excellent primer coating on rusty steel and iron for the application of oil-based paints. Once painted, it helps surfaces resist the effects of the weather without peeling or cracking.

Use On:
Trucks and Autos-  Equipment- Machinery- Boats
Marine Docks- Storage Tanks- Doors and Gates -Farm Equipment

Features and Benefits
Converts rust into a stable, paintable surface.
Eliminates the need for scraping, sandblasting or priming rusty surfaces.
Protects further rusting on surfaces exposed to rain, sun and salt spray.

Directions
Complete directions on product label
For best results, prepare surface by brushing the loose rust from the surface using a wire brush or sand paper. Spray two thin coats onto the surface.
After the surface has dried, it will turn black. Allow 48 hours to completely cure before painting. For long lasting protection, seal with two coats of a high quality oil-based paint. Do not apply if the surface temperature is below 50F. Store in a cool dry place, protect from freezing or temperatures above 100F.

Safety:
Danger: extremely flammable. May cause burns to eyes skin and respiratory tract. Keep out of the reach of children.

16 ounce can 11 ounce net weight

Properties
Appearance.... ..................... Brown Aerosol
Fragrance............................ Solvent
Specific gravity................... 0.74
VOC content....................... 35-40% by wt.
Solubility............................ Complete in water
Spray Pattern.. Spray
Extension Tube No

Active Ingredients CAS Number
Acetone  67-64-1
Isopropanol 67-63-0
Ethylene Glycol 07-21-1
Tannic Acid 1404-55-4
Oxalic acid ............................. 144-62-7