EPOXY PATCH KIT
One-Patch is a two component compound exceptionally durable concrete repair system formulated of epoxy thermosetting resins and abrasion aggregates. When troweled over concrete it will bond permanently without shrinking or cracking. Its surface resists heavy abrasive wear and chemical attack.
Excellent for filling deep ruts, cracks and holes.
Skid as slip resistant surface is easy to clean.
Mixes and applies easily.
No objectionable odor.
Adheres to almost every substrate and surface.
Surface should be clean, dry and free from oil and grease. Prepare surface according to label instructions. Mix part A and part B together, mixing thoroughly. Let stand 10 minutes for activation. Then mix in aggregate into liquids blending together to a uniform consistency. Use a mechanical paint type stirrer when available.
Trowel, screed and float epoxy patch to the desirewd depth and until a smooth surface is achieved. Allow 24 hours curing time before returning traffic to the area. DO NOT APPLY BELOW 60 F..
Technical info: ONE PATCHCONCRETE CompressiveStrenght20,000 psi 2000-4000 psi Tensile Strenght 4000 psi 350 psi Adhesion Strenght 158 in/lbs 36 in/lbs Cure Time 24 hrs 3 days
50 sq. ft @ 1/8 inch
Keep out of reach of children.
For industrial and Institutional use only.