SHIELD  --POROUS SURFACE SEALER

DESCRIPTION:

Shield is an environmentally friendly water proofer for Cement, Stone, Slate, and other mineral surfaces. This water based polymer emulsion does not require a catalyst for application. This product is a self curable polymer that provides excellent water and oil repellency as well as protection from salt and natural elements. Due to its unique functionality this will provide superior performance. Can be used on new concrete as a seal to keep the water in while concrete is curing.

DIRECTIONS:

Apply by brush, roller or simply spray on. Apply even coats. Allow to dry completely before applying additional coats. Applicationwillleaveaslightgloss. Product will seal porous surfaces with a oil and water proofing surface. One gallon should cover from 150-350 square feet. Allow to air dry 24 hours before contact with water is made.

ac#743

SHIELD   POROUS   SURFACE  SEALER

Chemical24 Hr.Spot Test

Results

Scale Rating: 1-10

1 =Worst10= Best

Antifreeze          10

Bearing Grease       10

Transmission Fluid              10

Motor Oil                       10

Bleach                           10

37% Hydrochloric Acid    9

37% Sulfuric Acid          10

1 0% Ammonium Hydroxide10

Monoethanolamine        10

50% Sodium Hydroxide       10

Methanol                       10

Mineral Spirits               10

1 % Tide Laundry Soap      10

1 0%Trisodium Phosphate  10

CAUTION: KEEP OUT OF

REACH OFCHILDREN

Product may cause skin irritation or dam¬age to eyes. Harmful if swallowed. Do not take internally. In case of contact with eyes, flood repeatedly with water and call physi¬cian. Avoid contamination of food. Wear rubber gloves when using.